If you have searched for "YF-S201 Proteus Library" on Google, GitHub, or Labcenter’s official forums, you have likely come up empty-handed. Out of the box, Proteus (version 8 and 9) does not include a native simulation model for flow sensors.
void setup() Serial.begin(9600); pinMode(2, INPUT_PULLUP); attachInterrupt(digitalPinToInterrupt(2), pulseCounter, FALLING); lastTime = millis();
Until then, the methods described above (VCO + potentiometer) are the industry standard for simulating the YF-S201 in Proteus. To directly answer the question: There is no official YF-S201 Proteus library . You will not find a single file to download and drop into your LIBRARY folder. However, that should not stop your simulation work.
Therefore, simulation requires generating a digital signal whose frequency varies based on an input stimulus (simulated water flow). Short answer: No.
flowRate = (pulseCount / PULSES_PER_LITER) * 60.0; // L/min totalLiters += flowRate / 60.0; // Add volume for 1 second
void pulseCounter() pulseCount++;
Serial.print("Flow Rate: "); Serial.print(flowRate); Serial.print(" L/min\t\tTotal: "); Serial.print(totalLiters); Serial.println(" L");
pulseCount = 0; lastTime = now; attachInterrupt(digitalPinToInterrupt(2), pulseCounter, FALLING);
If you have searched for "YF-S201 Proteus Library" on Google, GitHub, or Labcenter’s official forums, you have likely come up empty-handed. Out of the box, Proteus (version 8 and 9) does not include a native simulation model for flow sensors.
void setup() Serial.begin(9600); pinMode(2, INPUT_PULLUP); attachInterrupt(digitalPinToInterrupt(2), pulseCounter, FALLING); lastTime = millis();
Until then, the methods described above (VCO + potentiometer) are the industry standard for simulating the YF-S201 in Proteus. To directly answer the question: There is no official YF-S201 Proteus library . You will not find a single file to download and drop into your LIBRARY folder. However, that should not stop your simulation work. yf-s201 proteus library
Therefore, simulation requires generating a digital signal whose frequency varies based on an input stimulus (simulated water flow). Short answer: No.
flowRate = (pulseCount / PULSES_PER_LITER) * 60.0; // L/min totalLiters += flowRate / 60.0; // Add volume for 1 second If you have searched for "YF-S201 Proteus Library"
void pulseCounter() pulseCount++;
Serial.print("Flow Rate: "); Serial.print(flowRate); Serial.print(" L/min\t\tTotal: "); Serial.print(totalLiters); Serial.println(" L"); To directly answer the question: There is no
pulseCount = 0; lastTime = now; attachInterrupt(digitalPinToInterrupt(2), pulseCounter, FALLING);
Once the math games became fairly popular, I decided that branch out to other subjects. While much of my time right now is spent converting Flash games to a new programming langue, I am still creating new content and the site will continue to grow with the different games!