Introduction In the realm of electrical engineering, earthing (or grounding) is not merely a technical recommendation—it is the bedrock of safety, system reliability, and equipment protection. Without a properly designed and maintained earthing system, electrical installations are vulnerable to hazardous touch voltages, equipment damage from lightning strikes, and erratic operation of sensitive electronics.
| Type | Material | Minimum Dimensions | Notes | |-------|----------|--------------------|-------| | Rod | Copper-bonded steel, stainless steel | 14 mm diameter, 1.2 m driven depth | Most common | | Plate | Copper, galvanized steel | 600 mm × 600 mm × 3 mm | Requires excavation | | Tape / Strip | Copper | 25 mm × 3 mm | Laid in trench | | Foundation earth electrode | Reinforcing steel | Per structural design | Must be welded or tied for continuity | ss 551 code of practice for earthing
From TN-S to TT systems, from 1-ohm earth electrodes to 30 mA RCDs, every clause in SS 551 serves a purpose: to bring fault currents safely to ground and keep people and property out of harm’s way. equipment damage from lightning strikes