| Component | Driver Source | | :--- | :--- | | | NVIDIA Archive (search "nForce 430 Windows 7 driver") | | Ethernet (Realtek RTL8201) | Realtek website (legacy PCI Ethernet driver) | | Audio (Realtek ALC662) | Realtek HD Audio Codec driver (various versions) | | Integrated Graphics (6150SE) | NVIDIA GeForce 6 series driver (last version: 307.83) |
The manual is irrelevant – Ubuntu/Mint auto-detects all hardware except the NVIDIA graphics (use nouveau or legacy 340.x driver). Part 8: Frequently Asked Questions (From Manual Readers) Q: Does this board support 8GB of RAM? A: No. The NVIDIA MCP61 memory controller has a hard limit of 4GB (2x2GB sticks). Using 4GB modules will not POST. rc415t-am motherboard manual
The manual does not cover this, but community mods exist. Use the Snappy Driver Installer (SDI) tool to find unsigned nForce drivers for Windows 10. Warning: No official support; expect no ACPI sleep or GPU acceleration. | Component | Driver Source | | :---
| Feature | Specification | | :--- | :--- | | | Micro-ATX (9.6" x 8.8") | | CPU Socket | Socket AM2 | | Supported CPUs | AMD Athlon 64, Athlon 64 X2, Sempron (65W max) | | Chipset | NVIDIA MCP61 (nForce 405/430) | | Memory | 2 x DDR2 DIMM slots, max 4GB (DDR2-800/667/533) | | Graphics | Integrated NVIDIA GeForce 6150SE (shared memory) | | Expansion | 1 x PCIe x16, 1 x PCIe x1, 2 x PCI | | Storage | 2 x SATA II (3Gb/s), 1 x PATA (IDE) | | Rear I/O | VGA, 4x USB 2.0, RJ45 LAN, Audio (Line-in/out/mic), Serial port | | Power | Standard 24-pin ATX + 4-pin 12V | The NVIDIA MCP61 memory controller has a hard
| Pin | Signal | Pin | Signal | | :--- | :--- | :--- | :--- | | 1 | HDD LED (+) | 2 | Power LED (+) | | 3 | HDD LED (-) | 4 | Power LED (-) | | 5 | Ground | 6 | Power Switch (+) | | 7 | Ground | 8 | Power Switch (-) | | 9 | Reset Switch (if present) | - | (N/C) |