The is not a standalone IC. It is a populated printed circuit board (PCB) assembly —typically a 2- to 4-layer board—that functions as a high-voltage, current-sensing comparator or a solenoid driver. In 2021, the most common variant of this board was found to be based around the Texas Instruments LM2902 quad operational amplifier and the LM339 voltage comparator.
The bad news first: there is no official, manufacturer-published datasheet under the sole name "e82152." The good news: after cross-referencing 2021 production runs and reverse-engineering physical units from industrial VFDs (Variable Frequency Drives) and SMPS (Switched-Mode Power Supply) units, the veil has been lifted. e82152 schematic 2021
In the world of power electronics and module repair, few part numbers generate as much confusion—and as much demand—as the . If you have landed on this page, you are likely searching for the e82152 schematic 2021 revision, troubleshooting a failed driver board, or attempting to reverse-engineer a component marked with this silkscreen. The is not a standalone IC
Published: 2021 Revision Analysis
[24V DC IN] ---[LM7808 Regulator]--- +8V Rail (Vcc for Op-Amps) [Input Signal IN+] | [R1 - 10kΩ] | +----[LM2902_A (Buffer)]---+---[R3 (4.7kΩ)]---[LM2902_B (Gain Stage)] | | | GND | [R2 (1kΩ) to GND] [Current Sense] | [Shunt R25] | GND The bad news first: there is no official,