| Feature | Instructions | | :--- | :--- | | | Play DVD/USB video while driving. 5F > Coding > Byte 24 > Change from 06 to 04 (MIB2) OR 22 to 02 (MIB1) | | Traffic Sign Recognition (TSR) | Display speed limits in cluster. 5F > Adaptations > Car_Function_List_BAP_Gen2 > traffic_sign_recognition_0x21 > Activated Then A5 (Front Camera) > Coding > Byte 2 > Enable Bit 0 & Bit 1 | | Battery Level Display | Shows % charge in MMI. 5F > Adaptations > Battery level display > Active | | Audi Drive Select via MMI | Unlock driving modes (if not factory). 09 > Coding > Byte 7 > Enable Bit 5 AND Bit 6 | 5. Advanced Driver Assistance (Module A5, 13, 8E) | Feature | Instructions | | :--- | :--- | | Early Collision Warning (Audi Pre Sense) | More sensitive alert. 13 (Auto Dist. Reg) > Adaptations > Wake-up warning: warning intensity > change from Medium to High | | Lane Assist – Early Intervention | Keeps you centered earlier. A5 > Adaptations > Lane change assistance > Steering intervention response > Early | | High Beam Assist (Enable without hardware) | Only if camera present. 09 > Coding > Byte 6 > Enable Bit 2 (Then MMI shows option) | Part 3: Pre-Facelift vs. Facelift (8V vs. 8V FL) Differences The 2016 facelift changed several control modules. Not all codes cross over.
| Feature | Pre-FL (2012-2016) | FL (2016-2020) | | :--- | :--- | :--- | | | 09 (Highline BCM) | 09 (New BCM with different adaptation channels) | | Infotainment | MIB1 (Small screen) | MIB2 (Larger screen, different 5F byte mapping) | | Dash illumination | Analog dials | Virtual Cockpit available (Module 17 codes differ) | | Rear light coding | Standard LED | Matrix LED – DO NOT use pre-FL coding or you'll get errors. | audi+a3+8v+coding+list
By accessing the car’s Central Electrics (BCM), Instruments, and Infotainment modules via , you can activate features ranging from Needle Sweep to Traffic Sign Recognition and Video in Motion . | Feature | Instructions | | :--- |
Remember that Audi dealers will often revert coding during a software update (SVM). Always keep a local backup of your adaptation maps via VCDS (Select controller > Applications > Controller Channel Map > Save to CSV). 5F > Adaptations > Battery level display >