A1458 Optocoupler Datasheet Online

Many A1458 variants carry UL 1577, VDE 0884 (reinforced insulation), and CSA approvals. Always check the specific datasheet for regulatory marks if your design requires safety certification. Part 7: Typical Application Circuits (From Datasheet Examples) The A1458 optocoupler datasheet often includes reference circuits. Here are two common ones. Circuit 1: Digital Logic Isolation (High → Low) Scenario: Isolating a 24V PLC output to a 3.3V microcontroller input.

Switching speed is heavily dependent on the load resistor (R_L). A smaller R_L reduces the time constant (R_L * C_CE) but also reduces output voltage swing. For higher speeds (>100 kHz), consider a phototransistor optocoupler with a base access pin or a digital optocoupler. Part 6: Isolation Characteristics The isolation barrier is the primary reason to use the A1458. The datasheet provides the following isolation parameters: a1458 optocoupler datasheet

| Parameter | Symbol | Conditions | Typ | Max | Unit | |-----------|--------|-------------|-----|-----|------| | Rise Time | t_r | V_CE = 2V, I_C = 2mA, R_L = 100Ω | 4 | 18 | μs | | Fall Time | t_f | Same as above | 3 | 18 | μs | | Turn-On Time | t_on | I_F = 10 mA to I_C = 2mA | 5 | 20 | μs | | Turn-Off Time | t_off | Same | 4 | 20 | μs | Many A1458 variants carry UL 1577, VDE 0884

Introduction In the world of electronics, isolation is paramount. Whether you are designing a switch-mode power supply (SMPS), a microcontroller interface for industrial machinery, or a safety system for a medical device, the optocoupler (also known as an opto-isolator) is a critical component. Among the myriad of options available, the A1458 optocoupler has gained recognition for its balance of speed, current transfer ratio (CTR), and isolation voltage. Here are two common ones

| Pin Number | Name | Description | |------------|-------------|------------------------------------| | 1 | Anode (A) | Positive terminal of the IR LED | | 2 | Cathode (C) | Negative terminal of the IR LED | | 3 | Emitter (E) | Output phototransistor emitter | | 4 | Collector (C)| Output phototransistor collector |

| Model | CTR (%) | V_CEO (V) | t_on/t_off (μs) | Isolation (Vrms) | Best For | |-------|---------|-----------|-----------------|------------------|-----------| | | 50-600 | 80 | 5/4 | 5,000 | General purpose, wide CTR | | PC817 | 50-600 | 35 | 4/3 | 5,000 | SMPS feedback (lower V_CEO) | | 4N35 | 100 (min) | 30 | 10/10 | 5,000 | Hobbyist, older designs | | 6N137 | - (logic) | 7 | 0.075 | 5,000 | High-speed data (10 Mbps) |

| Rank | CTR Min (%) | CTR Max (%) | Conditions | |------|-------------|-------------|-------------| | A | 50 | 150 | I_F = 5 mA, V_CE = 5V, Ta=25°C | | B | 80 | 240 | I_F = 5 mA, V_CE = 5V, Ta=25°C | | C | 130 | 400 | I_F = 5 mA, V_CE = 5V, Ta=25°C | | D | 200 | 600 | I_F = 5 mA, V_CE = 5V, Ta=25°C |